The P3 Analog Gauge *This gauge IS NOT plug and play. Boost/vacuum hose to the engine is required and wiring needs to be completed for power, ground, and optional analog inputs.
Compatible with All Mk8 Golf/TDI/GTI/Golf R/Alltrack Models
4 Available Analog Readouts
- Analog boost (yellow/purple/black – dedicated plug for analog boost sensor) *boost tap not included – EA888 Boost tap
- Analog input 1 (brown wire – can read any 0-5 volt linear output sensor)
- Analog input 2 (blue wire – can read any 0-5 volt linear output sensor)
- Battery voltage (red wire / black wire – read through power and ground wires)
- optional auto-dim feature (green wire – connect to any circuit that gets power only when the headlamps are on and enable feature in the configuration menu for the display to auto-dim when the headlamps are on)
Optional Add-Ons
- OBD2 power/ground tap harness allows you to connect to power and ground through your OBD2 port without any wire splicing (does not add OBD2 functionality)
- P3 ESVA (ethanol sensor voltage adaptor) allows your gauge to read ethanol content and fuel temp directly from any Continental/GM Ethanol sensor *Ethanol sensor not included
- LC-2 Wideband o2 Sensor Kit allows your gauge to read your vehicle’s Air/Fuel Ratio. Includes everything you need to add a wideband sensor to your exhaust.
- Any Other 0-5 Volt Linear Output Sensor Can Be Read oil pressure, oil temp, coolant temp, air ride pressure, egt, etc…
Analog gauge base kit includes
- Integrated display
- Analog Box control unit
- Main harness
- Hard-wire harness
- Analog boost sensor *boost tap not included
- Approximately 5′ of 5/32″ O.D. boost tubing with 5/32″ I.D. hose at each end
- 3 zip ties
- 2 scotchlok wire taps
Part #
AP3VGT8 / LAP3VGT8 / LAP3VGR8
